Engine
Engine
Model: TCD 2.9 L4
Engine Type
4-stroke
Engine Manufacturer
Deutz
Engine Power
Net rating at 2,200 rpm (SAE J 1349): 60 hp (45 kW)
Engine Torque
Max: 177 lb ft (240 Nm) @ 1,600 rpm
Displacement
177 in3 (2,900 cm3 )
Cooling
Intercooler, Water
Cylinder Liners
4 in line
Exhaust
gas optimised
Emissions
EPA Tier 4 Final / EC stage III B
Starter
12 V / 3.5 hp (2.6 kW) | Cold-starting aid: Glow plugs
Fuel System
Fuel Type
Turbo diesel
Fuel System
Common Rail
Drivetrain
Transmission
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm.
Steering
Articulated, 1 steering cylinder with final positioning damping on both sides, fully hydraulic through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Gear Ratio (Primary)
Low: 0-3 / 0-6 mph (0-5 / 0-10 kph) | High: 0-10 / 0-22 mph (0-16 / 0-36 kph)
Brakes
Brake System Type
Service: Hydraulically actuated center-mounted disc brake, acting on all 4 wheels via 4-wheel drive | Auxiliary: Hydrostatic drive provides dynamic braking
Parking Brake
Mechanically actuated center-mounted disc brake on front axle
Wheels & Tires
Tires, Front Specification
405/70 R 18 SPT 9 Dunlop
Tires, Rear Specification
405/70 R 18 SPT 9 Dunlop
Battery
Battery
12 V / 100 Ah
Electric
Electrical
Nominal voltage: 12 V
Generator
14 V / 95 A
Operational
Operating Conditions
Breakout force at bucket edge (SAE J 732): 10,318 lbs (45,900 N)
Performance
Noise Level
Cab exterior: 101 dB (A) | Cab interior: 75 dB (A)
Hydraulics
Hydraulic Pump
Max: 17 gpm (64 l/min)
Maximum Pressure
Max Working: 3,625 psi (250 bar)
Dimensions
Dimensions
Load center from fork attachment point: 22″ (560 mm)
Height
Total (top of cab): 8′ 8″ (2,640 mm)
Length
Total, bucket on ground: 16′ 7″ (5,060 mm) | fork tines 4″ x 1.8″ (100 mm x 45 mm): 3′ 7″ (1,100 mm)
Width
Total: 6′ 1″ (1,850 mm) | of fork carrier: 4′ 1″ (1,240 mm)
Turning Radius
at outside bucket edge: 13′ 8″ (4,160 mm)
Wheelbase
6′ 11″ (2,100 mm)
Capacities
Volume
General-purpose bucket (SAE J 742): 1.05 yd3 (0.80 m3 )
Fuel Capacity
Tank: 20 gal (75 l)
Hitch Lift Capacity
at ground level (SAE J 732): 10,800 lbs (48,000 N)
Hydraulic Capacity
15 gal (55 l)
Load Capacity, Land
Tipping, straight at full reach (ISO 14397-1): 8,311 lbs (3,770 kg) | Tipping, articulated at full reach (ISO 14397-1): 7,341 lbs (3,330 kg) | Operating load (SAE J 1197) over the total lift and steering range: 2,945 lbs (1,335 kg) | Operating load in transport position, above ground level, total steering range: 5,512 lbs (2,500 kg)
Weights
Weight, In Running Order
(SAE J 1197): 10,802 lbs (4,900 kg)
Lights and Safety
Lighting
system in compliance with US/ISO standards, H7 headlamps
Features
Features
Axles: Rigid front axle with 35% limited slip differential. Oscillating rear axle with 35% limited slip differential. Center-mounted disc brake. | Stability factor: 2
