Indoors or out, the GEX 40-50 can tackle any task placed in its path. Transition smoothly and easily from indoors to outdoors with the CLARK GEX 40-50.
In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments with ease. Transition smoothly from indoor transportation to outdoors with no effort required from the GEX.
LOAD CAPACITY RANGE 8,000-10,000 LBS
TRAVEL SPEED UP TO 11.8 MPH (L) 12.4 MPH (U)
OVERHEAD GUARD LEAST 90.9 IN
TURNING RADIUS UP TO 106.3 IN
Features may include:
Powered Reversing Drive MotorsThe tires on the GEX 40 series contain a pivot point between the drive tires, which allows for zero-turn functionality with the tightest possible turning radius. The 2-wheel drive on the GEX provides added traction, especially on wet or uneven surfaces. And, the inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks. A tighter turn radius combined with anti-scuff design and additional stability allows for operators to navigate a wider variety of spaces with ease
LCD Dash DisplayThe LCD dash display on the GEX 40 series is fully adjustable and programmable, allowing certified operators to choose from four pre-set performance modes. The dash display also indicates the current alarm code and stores previous alarm codes for quick access, allowing technicians to quickly diagnose issues on the GEX 40. The LCD dash is also password protected, requiring a set password for certain adjustments that impact the operation of the truck.
80 Volt 100% AC SystemThanks to the 100% AC system and powerful 80V battery, the GEX 40 rivals IC truck performance in speed, acceleration, and gradeability. The GEX 40 series is equipped with a higher voltage system, which lowers line loss and heating, leading to greater efficiency. The GEX 40 is also better suited to rapid charge, because it only requires one receptacle via a single battery connector for rapid charging. Finally, the series can accommodate different batteries for increased operational efficiency. The GEX 40/45/50 can accommodate 72 kwh battery, increasing battery capacity and efficiency. All GEX models are EPA compliant.
Stable PlatformThe GEX 40 series is built on a stable platform with a low center of gravity, which was achieved by moving back the steer axle, dropping the battery compartment, and moving all major components to the lower half of the truck. This increases stability and reliability in all operations. The curve cutback feature on the GEX 40 reduces truck travel speed in turns, adding to the lateral stability of the truck, along with the wide stance of the truck.
Drive Motors & AxlesThe drive motors and axles on the GEX 40 series has fewer parts than typical drive motors, meaning minimum wear and leading to less downtime for your forklift. The drive motors are enclosed and brushless, and are equipped with thermal and stall protection. They are also equipped to add power when reversing for tighter turns. And, with sealed motor components, the GEX 40 is suitable for wet applications.
Electric:
Electric Electrical Power Unit: 80 hp Volt Operational Operating Speed Travel Speed Unloaded: 12.4 mph (20.0 kph) / 13 mph (21.0 kph) Dimensions Width 55 in (1396 mm) Height Height Overhead Guard: 90.9 in (2310 mm) Dimensions Right Angle Stack (add load length & clearance): 127.7 in (3244 mm) Outside Turning Radius 105.3 in (2675 mm) Capacities Load Capacity, Land Load Capacity: 8000 lbd (4000 kg)
Electrical Power Unit: 80 hp Volt
Power Unit: 80 hp Volt
Operating Speed Travel Speed Unloaded: 12.4 mph (20.0 kph) / 13 mph (21.0 kph)
Travel Speed Unloaded: 12.4 mph (20.0 kph) / 13 mph (21.0 kph)
Height Height Overhead Guard: 90.9 in (2310 mm)
Height Overhead Guard: 90.9 in (2310 mm)
Dimensions Right Angle Stack (add load length & clearance): 127.7 in (3244 mm)
Right Angle Stack (add load length & clearance): 127.7 in (3244 mm)
Load Capacity, Land Load Capacity: 8000 lbd (4000 kg)
Load Capacity: 8000 lbd (4000 kg)
Dimensions:
Electrical Power Unit: 80 hp Volt
Power Unit: 80 hp Volt
Operating Speed Travel Speed Unloaded: 12.4 mph (20.0 kph) / 13 mph (21.0 kph)
Travel Speed Unloaded: 12.4 mph (20.0 kph) / 13 mph (21.0 kph)
Height Height Overhead Guard: 90.9 in (2310 mm)
Height Overhead Guard: 90.9 in (2310 mm)
Dimensions Right Angle Stack (add load length & clearance): 127.7 in (3244 mm)
Right Angle Stack (add load length & clearance): 127.7 in (3244 mm)
Load Capacity, Land Load Capacity: 8000 lbd (4000 kg)
Load Capacity: 8000 lbd (4000 kg)
Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.
GEX 40-50
Indoors or out, the GEX 40-50 can tackle any task placed in its path. Transition smoothly and easily from indoors to outdoors with the CLARK GEX 40-50.
OverviewGEX 40-50
In the past, one truck would be used for outdoor applications and another truck would be used for indoor warehousing. Now one GEX can handle both environments with ease. Transition smoothly from indoor transportation to outdoors with no effort required from the GEX.
LOAD CAPACITY RANGE 8,000-10,000 LBS
TRAVEL SPEED UP TO 11.8 MPH (L) 12.4 MPH (U)
OVERHEAD GUARD LEAST 90.9 IN
TURNING RADIUS UP TO 106.3 IN
Features may include:
Powered Reversing Drive Motors
The tires on the GEX 40 series contain a pivot point between the drive tires, which allows for zero-turn functionality with the tightest possible turning radius. The 2-wheel drive on the GEX provides added traction, especially on wet or uneven surfaces. And, the inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks. A tighter turn radius combined with anti-scuff design and additional stability allows for operators to navigate a wider variety of spaces with ease
LCD Dash Display
The LCD dash display on the GEX 40 series is fully adjustable and programmable, allowing certified operators to choose from four pre-set performance modes. The dash display also indicates the current alarm code and stores previous alarm codes for quick access, allowing technicians to quickly diagnose issues on the GEX 40. The LCD dash is also password protected, requiring a set password for certain adjustments that impact the operation of the truck.
80 Volt 100% AC System
Thanks to the 100% AC system and powerful 80V battery, the GEX 40 rivals IC truck performance in speed, acceleration, and gradeability. The GEX 40 series is equipped with a higher voltage system, which lowers line loss and heating, leading to greater efficiency. The GEX 40 is also better suited to rapid charge, because it only requires one receptacle via a single battery connector for rapid charging. Finally, the series can accommodate different batteries for increased operational efficiency. The GEX 40/45/50 can accommodate 72 kwh battery, increasing battery capacity and efficiency. All GEX models are EPA compliant.
Stable Platform
The GEX 40 series is built on a stable platform with a low center of gravity, which was achieved by moving back the steer axle, dropping the battery compartment, and moving all major components to the lower half of the truck. This increases stability and reliability in all operations. The curve cutback feature on the GEX 40 reduces truck travel speed in turns, adding to the lateral stability of the truck, along with the wide stance of the truck.
Drive Motors & Axles
The drive motors and axles on the GEX 40 series has fewer parts than typical drive motors, meaning minimum wear and leading to less downtime for your forklift. The drive motors are enclosed and brushless, and are equipped with thermal and stall protection. They are also equipped to add power when reversing for tighter turns. And, with sealed motor components, the GEX 40 is suitable for wet applications.
